传动滚筒说书.docVIP

传动滚筒 使用说明 Driving pulley Installation Maintainence Manual 概述 传动滚筒是将驱动装置提供的扭矩传到输送带上，被广泛应用于电厂、港口、矿山、冶金、建材等部门。 1、Summarization Driving pulley is will drive the torque to provide conveyor belt, are widely applied in departments and so on power plant, harbor, mine, metallurgy, building materials. 结构 传动滚筒是由轴、轴承座、辐板、筒体组成，表面覆盖橡胶以增大驱动滚筒与输送带间的摩擦系数，轴承座内装调心滚子轴承，保证了支撑的稳定性，又保证了转动灵活。 2、Parts Driving pulley bearing , by shaft, solar panels, barrel, surface covered by increasing with rubber belt drive roller bearing, friction coefficient between inside pack self-aligning roller bearings, guarantee the stability of support and guarantee the flexible rotation. 工作原理 当驱动装置运转时，驱动装置中的扭矩传送到传动滚筒轴上，再由轴通过内部胀套（或者键）连接进而把扭矩传送到筒体上，由于滚筒与皮带之间的摩擦力，最后将扭矩传送到皮带上带动整条皮带机的运转。 Works When driving device operation, drive the torque transmission to the transmission of cylinder shaft, again by the internal bulge (or key) and the torque transmission to connect the cylinder, due to friction between the cylinder and belt transmission torque, and finally to the belt drive belt on the machine operation. 维护保养 应定期检查滚筒转动是否有卡死现象，轴承座应定期添加锂基润滑脂。 Maintenance Introduction Should check whether the rotating cylinder is jammed, housing should be regularly add lithium grease.