触屏手机进水若何办(国外英文资料).docVIP

触屏手机进水怎么办(国外英文资料) What about a touchscreen phone If the water is not serious, it can be fixed. Heres how to do it. The first is to blow off the surface and the obvious water in it. Demolition machine, take my demolition machine tool and all the things that tear down to take a big picture! Find a box, pour the alcohol into it, throw it in, and let it soak for 15 minutes. When the mainboard is in the bath we go to handle the moisture that the blower is not blown inside, the dust that the dust can take the opportunity to wash together in the former case! Looking for a soft bristle brush, high party, high party, one, two, three... Singing, hehe! Touch the touch screen, the touch screen is best not to drink alcohol bubble, inside have a line, afraid of alcohol. Remove water and dust directly from cloth. Have a computer at home, put the touch screen to the computer outlet, if use hair dryer, considering that the temperature is higher, touch screen and plastic products, its too hot deformation! The computer problem is about 45 degrees, exactly! The wind slowly! Suit my taste!!! Ha ha Next is the LCD screen, LCD screen if you are into the water, that is more troublesome, because it is difficult to come out the inside of the water, only a small hole, I didnt water is good Installed if water is no problem, I have a camera screen also into water), just look hazy feeling, as long as you put on (against) body, let the body temperature slowly let moisture volatilizes, my card camera is in 3 days or so to not! You dont want to use your cell phone, suggest the same way, I feel like one day is similar! And then we do the slide again, which is the main line segment. Can also wash with alcohol, but there are three things pay attention to the above, is the distance sensor, a front-facing camera and light sensors, these three things have to do is wipe with dry cloth! And then you blow dry Back to deal with the mainboard, also with tooth brush, mainly is the chip, is covered with metal,