Photoshop图片分化实例：终结者T-XBK后果(国外英文资料).docVIP

Photoshop图片合成实例：终结者T-XBK效果(国外英文资料) Attention should be paid to the layer order before making physical mechanical splicing, the face is in the color layer above, and some mechanical parts of the body is under characters crack layer, some on it, because some mechanical parts need perspective characters crack layer keep out, while others dont need. Open the material 3 multilateral tool to outline some of the machine skeletons and paste them under the characters cracks, named body mechanics. Then hold down CTRL + character crack layer float, in the back body mechanical layer CTRL + X to delete redundant part at the cracks in the body so you can see the body of the machine. As shown in figure 7. C: right In mechanical body on a new layer named mechanical arm, in material 3 the outline of the joints of the arm, replication, CTRL + T rotate after adjustment, cohesion in the obvious part can use the burn tool. And then were looking for some pipes, and we make adjustments, and we make internal mechanical gears. As shown in figure 8. D: other parts of the machine Method is same as above, but to choose the right parts, note also join parts processing, to add the shadow and inner shadow, when its necessary to deepen the processing, found their way into the first draft. In figure 9. 4, the chest remnants the rusty mechanical manufacture A: the style of the above is the original production, but have A friend suggested that since it is damaged the terminator, will expose more metal in the body, so the following additional production of A part of the chest. From the material 3 B: half the outline of mechanical parts, paste below the characters crack layer, named mechanical chest, CTRL + T adjust the size (in order to make convenient, it is recommended that the off color layer), CTRL + this layer after floating, return to characters crack layer cut off part of the machinery. As shown in figure 10. C: the exposed mechanical chest is too bright to match the rusting style. Open the la