剪力墙工程细部处理与通病防治浅说(国外英文资料).docVIP

剪力墙工程细部处理与通病防治浅说(国外英文资料) The engineering detail treatment and the prevention and treatment of disease (one of the brief series) When the spring wind is warm and everything is recovering. The project of xianglin water bank is fully developed. Present tense warmly and orderly gratifying situation, for the whole project implement total quality management, further deepening for site engineering technical management, briefly introduced the construction series, as a routine disclosure. For reference. And they are very carefully implemented. The ability to provide points for each department. It is our intention to upgrade the quality management of the whole project. Frame shear wall structural detail and disease: During the construction of the project. Often arise 1. The shear wall is not straight, (2) on the lower shear wall displacement, wrong table, uneven, such as shear wall horizontal construction joint seams, elevator shaft side stair parts, such as this kind of phenomenon. 3. The shear wall plane twisted, cut the hole not founder, the hole expansion mode, 4. The shear wall at the bottom of the slag, roots rotted, the production of such a problem, will seriously affect the quality of construction engineering, in order to solve these problems, draw lessons from the optimization of the reasonable construction measures, the summary of construction experience, the following preventive measures are proposed according to engineering structure design features: (1) the wrong table on the wall of the shear wall, the concrete wall, the shaft wall of the elevator and the concrete wall of the stairway, etc. At the top of the lower wall wall, the pull bolts are set. In order to use this bolt and the wall to tighten the wall of the wall. For the outside of the frame column, the bottom concrete is cast. Place the preset bolt at the top of the floor, 100 to 200 mm. In the match mode, the lower part of the position is increased by 200 to 300mm. When the template is set, the bottom o