电焊工作业安全操作要点（规程）.docVIP

电焊工作业安全操作要点（规程） 电焊工作业安全操作要点（规程）提要：施焊时，应清除周围的易燃、易燃物品或进行可靠覆盖、隔离。电焊结束后，应切断焊机电源并检查操作地点，确认无起火危险后，方可离开 源自物业论文 电焊工作业安全操作要点（规程） （1）电焊机外壳必须接地良好，电焊机应设单独开关，焊钳和把线必须绝缘良好，连接牢固。 （2）严禁在带压力的容器和管道上施焊，焊接带电的设备必须切断电源。焊接贮存过易燃、易爆和有毒物质的容器和管道时，应先清洗干净并将所有孔口打开。在潮湿地点施焊时，应站在绝缘板或木板上。 （3）把线、地线禁止与钢丝绳接触，不得以钢丝绳和机电设备代替零线，所有地线接头必须连接牢固。 （4）清除焊渣时应戴防护眼镜或面罩。 （5）多台焊机在一体集中施焊时，焊接平台或焊件必须接地，并设置隔光板。 （6）雷雨时应停止露天电焊作业。 （7）在易燃、易燃气体或液体扩散区域施焊前，必须得到有关部门的检试许可。 （8）施焊时，应清除周围的易燃、易燃物品或进行可靠覆盖、隔离。电焊结束后，应切断焊机电源并检查操作地点，确认无起火危险后，方可离开。 源自物业论文 Measures for the routine management of moral education in Middle SchoolsMethod of conventional management of moral education in middle schoolFirst, the guiding ideology:School moral education is an organic whole of the whole education work, always adhere to the school adhere to the moral education, education for this product, and actively promote the quality education, the school building efficient curriculum system of moral education, moral education, improve the sense of attraction and appeal, enhance the moral education work for through and timeliness. Teach everyone, service education and management education, and school moral education work must be with family education and community education closely together, to form a concerted pattern, and strive to create a good atmosphere for education, and to promote the all-round development of students, to establish a scientific moral education full of vigor the For long-term mechanism.Two, the goal of moral education:To guide the students to form the correct world outlook, outlook on life, values, to cultivate students unity and mutual assistance, honest and trustworthy, law-abiding, good quality, hard work, set a good XX students ideological quality, psychological quality and image quality. The formation of excellent moral education curriculum system and management system, the construction of school. The society, family moral education network, to achieve full member education, environment education,