种植修复资料.pptVIP

一体式基台 One-piece Abutment;临床图片 (Clinic side);;;一体式 (Combi); 封闭式 (Transfer type) 开窗式 (Pick-up type);美学需求 (Esthetic requirement) 种植角度 (Implant angulation) 种植位置 (Implant location) 植入深度(穿龈高度) (Fixture installation depth (Gingival Height)) 牙弓间距离 (Interarch distance) 修复类型 (Prosthesis type) 牙医和技工的喜好 (Dentist Dental technicians preference) ;Comport cap;☆ Conventional Technique : Put cord and impression possible ;1. 选择基台替代体 (Choose Lab . Analog) 2. 将基台替代体连接在转移帽上 (Combine with Impression coping) 3. 制备工作模型 (Manufacture master model) 4. 制备牙冠 (Manufacture crown); Hexed Non-Hexed;简单 容易 (Simple Easy) 椅旁时间少，和传统治疗相似 (Only a small amount of Chair time used, and must be similar to Conventional treatment) 可在技工室选择和调整基台，对患者来说比较方便 (Choosing and adjusting Abutment in the Lab is convenient for the patient.) REC) 种植体水平封闭式取模 (Fixture level impression by transfer type) 分体式非六角基台 (Non-Hexed Dual Abutment) 可修补性 (Retrievability) 选择粘接材料 (Choosing cement materials) 对颊舌粘膜无刺激 (Leave a notch within the range that’s not stimulated on the tongue or cheek for hook or ejection) ZPC或聚羧酸水门汀 (ZPC or Polycarboxylate cement) 结合粘接固位和螺丝固位的修复方法 (Combine the method of cementation and screwing (SCRC)) REC) 分体式基台：修复体合面备洞，方便取下并修补修复体 (Dual Abutment : With making a hole on occlusion after restoration, remove and repair prosthesis.);☆ Use Positioning Jig to transfer the Abutment Model to the oral cavity then tighten it (25~30N.cm). Re-tighten after 15 minutes. ☆ When equipped in the mouth and when rebounding by gingival tissue, hold for 10~15 minutes ;分体式可研磨基台(Dual milling Ab.) Similar to Dual Ab. Create Path modification and optional margin by milling 角度基台 (Angled Ab. (15°)) When installed path is unfavorable 临时基台 (Temporary Ab.) When immediate loading After provisional crown is manufactured when gingival contouring 直接可铸造基台 (Direct casting Ab.) Manufacture of Individualized abutment possible ;通过诱导应力沿种植体长轴传导