ANDF-2型蓄电池放电仪说明书解决方案.docVIP

ANDF-220V/200A型蓄电池智能放电装置 PAGE  PAGE 31 ANDF-220V/200A型蓄电池智能放电装置 1 ANDF-220V/200A型蓄电池智能放电装置 使用说明书 河南省安耐德电力设备有限公司 目 录 LIST 第一章 概 述 Chapter I General 1.1 概述General 1.2 产品特点 Characteristics 1.3 技术指标Technical indexes 第二章 用户操作界面 Chapter II User’s operation interface 2.1使用建议Application recommendation 2.2接线Wiring 2.3 基本操作方法Basic operation method 2.3.1 基本特点Basic features 2.3.2 用户操作键盘 User’s operation keyboard 2.3.3 基本操作方法 Basic operation method 第三章 接口定义及注意事项 Chapter III Definitions of interface Notes 3.1智能放电装置接口Interface of intelligent discharge devic 3.2 注意事项Notes JZ-BID-Ⅱ型蓄电池智能放电装置使用说明书 手册导读Guidelines to the Instruction 本手册的定位 Positioning 详细介绍了ANDF-220V/120A型蓄电池智能放电装置的基本原理功能性能和特点结构与接口并给出了相关的图表 This Instruction detailed the basic principle, functions, performance, characteristics, structure and interface as to the JB-BID-II accumulator intelligent discharge device, including relevant figures. 本手册的主要用途Main use of the Instruction 1. 产品技术推广和制作标书技术条款 Technical promotion of products, used as technical terms for tender 2. 用户操作过程的参考 Reference in terms of operation 3. 指导工程设计单位完成电力机房电源工程设计 Guidance for engineering design unit to complete the power engineering design for power room 4. 用户的参考资料 Referential material for users 读者Readers 工程设计选型人员Type selection staff for engineering 电力操作电源用户User for power operation 技术推广和投标人员Technical promoter and tender staff 第一章 概 述 Chapter I General 1.1 概述General 蓄电池作为备用电源在直流系统中起着极其重要的作用,从而在电力、通信、金融、交通等各行各业中得到广泛的应用。平时蓄电池组处于浮充电备用状态，负荷由交流供电，只有当交流电失电时，蓄电池组才向负荷提供能量。 As the backup power supply, accumulator played an important role in terms of DC system, which also leads to its extensive application in power, telecom, finance and transport industries etc. During ordinary time, accumulator set would be under floating charge backup status, the load would be powered by AC, and the failure of the later would generate the accumulator set to provide ene