07-罗氏电化学发光免疫分析仪定标物信息_V3.5.docVIP

Dear Colleagues, Due to the recommended single use concept on E 170 for MODULAR ANALYTICS and cobas e 601/2, additional bottle labels are added to each calibrator package. Unless the entire volume is necessary for calibration, transfer aliquots of the (reconstituted) calibrator into empty labeled snap-cap bottles and attach the supplied labels to these additional bottles. Although within E170 SW 08-x and for cobas e 601/2 the single use concept has been from the software point of view skipped, it is still officially valid as described in the corresponding package inserts. Please find attached a summary of possible calibrator aliquotions, which takes the below mentioned points into consideration * calibrator volume * sample volume * no. of calibration events (max. 4 calibration events possible per calibrator vial set) * calibrator vial dead volume of 200 μl * no. of additional calibrator bottle labels. Reagent type CalSet CalSet Cat.no. Package content Volume per CalSet vial (ml) Volume per determination/calibration (μl) Possible aliquots (number and volume in μl) for one calibration event Possible aliquots (number and volume in μl) for two calibration events Possible aliquots (number and volume in μl) for four calibration events Thyroid FT3 (lyo)2 levels, each level two bottles 1 15/30 4/250 3/330 3/330 FT42 levels, each level two bottles 1 15/30 4/250 3/330 3/330 T3 (lyo)2 levels, each level two bottles 1 30/60 3/330 3/330 2/500 T4 2 levels, each level two bottles 1 15/30 4/250 3/330 3/330 TSH2 levels, each level two bottles 1,3 50/100 3/400 3/400 2/600 T-uptake2 levels, each level two bottles 1 15/30 4/250 3/330 3/330 Reagent type CalSet CalSet Cat.no. Package content Volume per CalSet vial (ml) Volume per determination/calibration (μl) Possible aliquots (number and volume in μl) for one calibration event Possible aliquots (number and volume in μl) for two calibration ev