双向转发检测协议.docVIP

双向转发检测协议 篇一：BFD(双向转发检测)协议 思科BFD协议 Bidirectional Forwarding Detection (BFD) 顾名思义为双向侦测协议，只检测与下一跳设备设备连接状态。目前只在7200以上系列路由器千兆以太接口以上支持，并支持OSPF、ERGRP、ISIS、BGP协议。当客户端协议建立后，将告诉BFD协议去检测邻接连接状态。BFD检测包在CEF中具有高的优先级，并且通过unicast形式相互传播。 FIGURE 1 When OSPF discovers a neighbor (step 1) it sends a request to the local BFD process to initiate a BFD neighbor session with the OSPF neighbor router (step 2). The BFD neighbor session with the OSPF neighbor router is established (step 3). FIGURE 2 When a failure occurs in the network (step 1), the BFD neighbor session with the OSPF neighbor router is torn down (step 2). BFD notifies the local OSPF process that the BFD neighbor is no longer reachable (step 3). The local OSPF process tears down the OSPF neighbor relationship (step 4) 配置 : 可以应用到所有接口上 router ospf 1 [no] bfd all-interfaces 也可以应用在单个接口上 [no] ip ospf bfd [disable] 例子 Configuration for Router A interface Ethernet2/0 ip addre ss 172.16.10.1 255.255.0.0 bfd interval 50 min_rx 50 multiplier 3 ! router ospf 1 log-adjacency-changes detail network 172.16.0.0 0.0.255.255 area 0 bfd all-interfaces Configuration for Router B interface Ethernet1/0 ip address 172.16.10.2 255.255.0.0 bfd interval 50 min_rx 50 multiplier 3 ! router ospf 1 log-adjacency-changes detail network 172.16.0.0 0.0.255.255 area 0 bfd all-interfaces 显示本地状态 RouterA#sh ip ospf int e2/0 Ethernet2/0 is up, line protocol is up Internet Address 172.16.10.1/16, Area 0 Process ID 1, Router ID 172.16.10.1, Network Type BROADCAST, Cost: 10 Transmit Delay is 1 sec, State BDR, Priority 1,BFD enabled Designated Router (ID) 172.16.10.2, Interface address 172.16.10.2 Backup Designated router (ID) 172.16.10.1,Interface address 172.16.10.1 Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 查看邻居状态 show ip ospf neighbor RouterA#sh ip ospf nei 172.16.10.2 det Neighbor 172.16.10.2, interface address 172.16.10.2 In the area 0 via interface Ethernet2/0, BFD enabled Neighbor prior