junipersrx恢复出厂设置.docVIP

下载本文档

656
0
约4.16千字
约 3页
2017-06-08 发布于重庆
举报
版权申诉

junipersrx恢复出厂设置.doc

1、有哪些信誉好的足球投注网站（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

junipersrx恢复出厂设置

SRX Getting Started - Factory Reset [KB15725] Show KB Properties [KB15725] Hide KB Properties Categories: SRX Series Knowledge Base ID: KB15725 Last Updated: 27 Oct 2011 Version: 4.0 Summary: This article describes how to return the configuration on an SRX Series device to the factory default version configuration file that is shipped with the device .For other topics, go to the SRX Getting Started main page. Problem or Goal: Reset the configuration to the factory default. Cause: Solution: There are three ways to reset an SRX Series device to its factory default configuration. Using the Reset Config Button requires access to the front panel of the device Using the load factory-default Command requires login to the CLI Using the Root Password Recovery Process requires console access to the device Using the Reset Config Button Note: The Reset Config button is available only on the SRX100, SRX210, SRX240, and SRX650 devices. You can use the Reset Config button on the front panel of the SRX Series device to reset the device to its factory default configuration. The Reset Config button is recessed to prevent it from being pressed accidentally, so you need to insert a small probe for example, a straightened paper clip to press the button.Caution: If you use the Reset Config button to reset the device to its factory default configuration, all the configuration files, including the rescue configuration and backup configurations, are deleted. For more information, see the Hardware Guide for your device at /techpubs/hardware/junos-srx/index.html.To reset the device to its factory default configuration, press and hold the Reset Config button on the front panel of the SRX Series device for at least 15 seconds, until the Status LED glows amber. Using the load factory-default Command If you are still able to log in to the device with the CLI, you can use the load factory-default command to return the device to its factory default configuration. The load