Cottoclarin 88 ECO.docVIP

Direction for Production －Cottoclarin 88 ECO－ quipment：reaction kettle（mix） ormulation： Fatty acid methyl ester sulfonate sodium 40% Fatty Alcohol Ethoxylate(AEO-9) 10% Diethylene-glycol-monobutyl-ether 3% Antifoaming agent 0.5% Deionized water 46.5% Total 100% Direction for Production： 1 kg MES and100kg AEO,30kg Diethylene-glycol-monobutyl-ether are added in kettle 2，Stiring about ten minutes until even and transparent 2，Add kg water and 5kg antifoaming agent , stiring about twenty minutes and well mixed. 4，Discharge and package Waste Disposal Method： 1Flush spill area with water spray 2，Wastewater are drained into wastewater plant. Precaution to Be Taken in Handling and Storing： 1，Use mask, splashroof safety goggles an rubber gloves 2，keep away from heat, sparks, and open flame. 3，Avoid contact with eyes, Use splashroof safety gogglesName: Cottoclarin 88 Product Line: Pretreatment Substrate: To be added Description: Low foaming scouring agent for Pretreatment of cotton, Cottoclarin 88 is specially suitable for Continuous Pretreatment of Woven fabric. Direction for Production －Cottoclarin CPB－ quipment：reaction kettle（mix） ormulation： Fatty acid methyl ester sulfonate sodium 60% Diethylene-glycol-monobutyl-ether 3% Carbamide 2.5% Antifoaming agent 0.8% Deionized water 33.7% Total 100% Direction for Production： 1 kg MES and 30 kg Diethylene-glycol-monobutyl-ether are added in kettle 2，Stiring about ten minutes until even and transparent 2，Add kg water ,25kg Carbamide and8kg antifoaming agent , stiring about twenty minutes and well mixed. 4，Discharge and package Waste Disposal Method： 1Flush spill area with water spray 2，Wastewater are drained into wastewater plant. Precaution to Be Taken in Handling and Storing： 1，Use mask, splashroof safety goggles an rubber gloves