Packet Tracer 模块介绍.docVIP

1.NM-1E The NM-1E features a single Ethernet port that can connect a LAN backbone which can also support either six PRI connections to aggregate ISDN lines, or 24 synchronous/asynchronous ports. 纳米- 1 E功能单一的以太网端口，可连接局域网的骨干，其中也可以支持六时连接到总量IS 1.NM-1E The NM-1E features a single Ethernet port that can connect a LAN backbone which can also support either six PRI connections to aggregate ISDN lines, or 24 synchronous/asynchronous ports. 纳米- 1 E功能单一的以太网端口，可连接局域网的骨干，其中也可以支持六时连接到总量ISDN线路，即24同步/异步端口。 2.NM-1E2W The NM-1E2W provides a single Ethernet port with two WIC slots that can support a single Ethernet LAN, together with two serial/ISDN backhaul lines, and still allow multiple serial or ISDN in the same chassis. 纳米- 1e2w提供一个单一的以太网接口与两个WIC的插槽，可以支持一个单一的以太局域网，连同两个串行/ ISDN的回程路线，仍允许多个串行或ISDN在同一底盘。 3.NM-1FE-FX The NM-1FE-FX Module provides 1 Fast-Ethernet interface for use with fiber media. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet. 纳米- 1fe效果器模块提供一快速以太网接口，用于与光纤介质。适合各种局域网的应用中，快速以太网模块，支持许多互联功能和标准。单端口网络模块提供autosensing 10/100basetx或100basefx以太网。 4.NM-1FE-FX The NM-1FE-TX Module provides 1 Fast-Ethernet interface for use with copper media. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet. The TX copper version supports virtual LAN VLAN deployment. 纳米- 1fe效果器模块提供一快速以太网接口，用于与光纤介质。适合各种局域网的应用中，快速以太网模块，支持许多互联功能和标准。单端口网络模块提供autosensing 10/100basetx或100basefx以太网。 5.NM-1FE2W The NM-1FE2W Module provides 1 Fast-Ethernet interface for use with copper media, in addition to 2 Wan Interface Card expansion slots. Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. Single port network modu