绳索的制作.docVIP

用图案画笔制作绳索 效果预览： Step 1 钢笔勾画，下端点方向线水平，上端点成45°角。 镜像并连接 Step 3 再次镜像、连接。 Step 4 重复操作。 Step 5 Step 6 复制多个。 Step 7 水平、垂直平均分布。 Step 8 轮廓化描边——路径查找器、相加——释放复合路径——ctrl+y（轮廓化显示） Convert all the outlines to filled objects (Object Path Outline Stroke), create one shape from it (Pathfinder – Add to Shape Area), and release the compound path (Object Compound Path Release or press Alt + Shift + Command + 8). You might use the Outline View (Command + Y) to check the result. Step 9 只留下如下图的图形。 Remove the outline and everything but 2 rows. Now it’s time to connect certain squares to get the typical look of a climbing rope. Step 10 修改图形如下所示（删除一些边）。 Use the Outline View (Command + Y) to remove certain parts of the squares. Step 11 路径连接。 Reconnect the squares as seen below by selecting and joining the equivalent anchor points (Command + J). Step 12 填颜色、复制。 Duplicate all and move it to the right. Use the Magnetic Guidelines (Command + U) for the perfect distance. To do so the movement has to be performed in two smaller steps. Now it’s time to choose the colors of the rope. Step 13 复制多个，成组。 Extend the rope even more and group everything (Command + G). Step 14 向下复制一个，并对复制图形黑色描边——路径、轮廓化描边，如图所示。 Duplicate the group and paste it in the background (Command + B) for the new outline. Choose a black outline with rounded corners and convert the outline to a filled object (Object Path Outline Stroke). Step 15 所有图形成组，建矩形，注意切得位置，在相互连接时能严密接上。 Select all and group it (Command + G). Draw a rectangle and make sure that the left and right side lock at equivalent anchor points of the climbing rope. Step 16 使用路径查找器中的修编命令。（以前的轮廓化描边就是为这步准备的，因为此命令会消除描边） Select all and create a Clipping Mask (Object Clipping Mask Make or press Command + 7). Then use the Pathfinder to remove the hidden parts (Pathfinder Trim). Step 17 建立图案画笔。 Select all and create a Pattern Brush (Brushes New Brush New Pattern Brush). Use the settings shown below. Conclusion 画笔工具画路径。 Now you can use the Brush Tool (B) or Pen Tool (P) wi