标准号对照表.xls

对照表2 国标 美标 不锈钢材料 标准号对照表 厚六角螺母 DIN6334 hexagon nuts ,1.5d with collar DIN6797-A DIN6798-A external teeth lock washers 外齿锁紧垫圈 内齿锁紧垫圈 DIN6798-I 外锯齿锁紧垫圈 DIN6799 DIN6888 hexagon head bolts with large head(friction grip bolts) DIN6915 DIN6916 楔型方垫圈 DIN6900 DIN6901 DIN7337 blind rivets DIN7338 开口型抽芯铆钉（沉头、扁圆头） 螺旋夹紧销 spiral pins threadforming screws for ISO-metric thread hexagon head fitted bolts for steel structures DIN7971 DIN7972 DIN7973 countersunk flat head tapping screws with slot ISO1482 ISO1483 DIN7976 六角头自攻螺钉 DIN7980 DIN7982 GB845-85 ISO7051 DIN7984 钢结构用六角头螺栓 DIN7991 内六角沉头螺钉 hexagon socket countersunk head screws DIN7995 十字槽半沉头木螺钉 DIN7996 DIN7997 cross recessed countersunk head wood screws DIN8140 belting bolts (elevator bolts) Description in Chinese Description in English ISO-Standard DIN1 圆锥销 taper pins 开槽盘头螺钉 单耳止动垫圈 开口销 GB97.1-85 波形弹垫 T-head bolts with square neck DIN188 螺纹圆锥销 wing screws germany form slotted set srews with full dog point pipe nuts with thread 外舌止动垫圈 washers for cheese head screws 细牙六角薄螺母 密封帽 eye bolts form B GB798-88 内舌止动垫圈 internal tab washers DIN464 DIN465 DIN470 retaining rings for shafts(external),circlips DIN478 square head bolts with collar,half dog point and rounded end ISO299 DIN525 DIN529 地脚螺栓 GB799-88 带槽圆螺母 GB817-76 端面带孔圆螺母 round nuts with drilled holes in one face DIN551 开槽平端紧定螺钉 六角螺母 square nuts 六角头螺钉 DIN561 square nuts without bevel(pressed nuts) DIN580 吊环螺钉 T型方颈螺栓 蝶型螺母(美制) 方螺母-C 卡头 六角头螺母(1型) 细牙六角头螺母(2型) 圆锥型槽销(半槽) 沉头槽销 U型螺栓 德国标准和国际标准、中国标准中英文对照表 序号 德国标准 中文品名 英文品名 国际标准 中国标准 Item DIN-Standard ISO2339 parallel pins ISO2338 GB119-86 slotted cheese head screws slotted pan head screws ISO1580 GB67-85 DIN93 tab washers GB854 split cotter pins 开槽半沉头木螺钉 slotted raised csk head wood screws GB101 开槽半圆头木螺钉 slotted round head wood screws GB99 开槽沉头木螺钉 GB100 DIN125-A plain washers ISO7089 平垫(带倒角) mediun washers plain washers 重型弹垫 spring lock washers,tang ends DIN127-B spring lock washers,square ends GB93-87 single coil spring lock washers GB7245