IDEC和泉HS5系列 HS1T型用 滑插式门把型执行元件 使用说明书 英语.pdf用户手册.pdf

B-2247(2) *installing the rear unlock button Install a mechanical door stop to the end of the door to protect Dimensions Bolt 四 DECc Install the rear unlock button kit for frame the slide handle actuator against excessive force， “HS9Z-EH5L Mounting screw | mounting (HS9Z-FL5 口 ) *Do not move the slide handle actuator with excessive force when the dooris 下 For detail see the instruction sheet locked.Dtherwise, the actuator may be damaged and may not operate properly- INSTRUCTION SHEET Remeove the standard button from the HS5E-KDDL “Installthe slide handle actuator on the outside of the door. Mounting Part Width (hinged deor) Slide Handle Actuator HS5L-DUHS1T-OL Interlock switch in order io Denot nstal nside he dooriotnenv se the door cannotbe openen 0 MountngPartWidhWymm| Mountng Center 1 install the rear Unlock button kit for mountin， C088| Y ine operator arecrng the operatuon anc 5ausing P0SSD e HS5 Series/Type HS1T Te 2 9 由 dangerto the operator 40W45 Confirm that the delivered product is what You have ordered、Read this instruction sheet to Do not close the doer when the bolt is slid out Otherwise, the actuator 45SW50 make sure of correct operation. Make sure that the instruction sheet is kept by the