美国船级社标准ABS Corrigenda Steel Vessels Under 90 Meters (295 Feet) in Length.pdfVIP

RULES FOR BUILDING AND CLASSING STEEL VESSELS UNDER 90 METERS (295 FEET) IN LENGTH 2006 CORRIGENDA/EDITORIALS – 24 February 2006 CORRIGENDA/EDITORIALS – 1 June 2006 CORRIGENDA/EDITORIALS – 1 November 2006 CORRIGENDA/EDITORIALS – 29 January 2007 CORRIGENDA/EDITORIALS – 12 April 2007 CORRIGENDA/EDITORIALS – 1 July 2007 CORRIGENDA/EDITORIALS – 30 January 2008 CORRIGENDA/EDITORIALS – 31 March 2008 CORRIGENDA/EDITORIALS – 1 July 2008 CORRIGENDA/EDITORIALS – 1 October 2008 Note: The Part/Chapter/Section headings and references in the “Paragraph” column relate to the printed 2006 Under 90m Rules. Changes to Part 1 references noted in the “Comments” column are due to the publication of the consolidated ABS Rules for Conditions of Classification (Part 1), which resulted in the Sections of Part 1 of the Under 90m Rules being renumbered (for example, Section 1-1-3 is now Section 1-1-2). See Notice No. 7. Page No. Paragraph Comments Table of Contents iii Foreword Add new second paragraph, as follows, “Thus, this supplement specifies only the unique requirements applicable to steel vessels under 90 meters (295 feet0 in length. This supplement is always to be used with the aforementioned Rules for Conditions of Classification (Part 1) .”. v TOC Add new note below Section 4, as follows, “[See also separately published booklet ABS Rules for Conditions of Classification (Part 1)]”. Part 1 Conditions of Classification Chapter 1 Scope and Conditions of Classification Section 4 Rules for Classification 17 1-1-4/1.3 Reference “1-1-4/3” to read “1-1-4/3 of the ABS Rules for Conditions of Classification (Part 1)”. Part 1 Conditions of Classificat