MIL-STD-2105D-2011 国外国际标准.pdf

METRIC MIL-STD-2105D 19 April 2011 SUPERSEDING MIL-STD-2105C 14 July 2003 DEPARTMENT OF DEFENSE TEST METHOD STANDARD HAZARD ASSESSMENT TESTS FOR NON-NUCLEAR MUNITIONS AMSC 9200 AREA SAFT DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. MIL-STD-2105D FOREWORD 1. This military standard is approved for use by all Departments and Agencies of the Department of Defense. 2. Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE NAVY, Indian Head Division, NSWC, Code E12AP, Document Control, 4123 Artisans Court, Suite 103, Indian Head, MD 20640-5115 OFFICIAL BUSINESS, or emailed to amanda.penn@. Since contact information can change, you may want to verify the currency of this information using the ASSIST Online database at . 3. This document contains a description of tests or references to NATO Standardization Agreements (STANAGs) for the assessment of munition safety and Insensitive Munitions (IM) characteristics of non-nuclear munitions. Historically, this standard was used primarily for the assessment of weapon safety. The standard was later revised to add additional IM tests as called out by the Joint Service Requirement for Insensitive Munitions (JSRIM), and now by various NATO STANAGs. The previous revision made a distinction between weapon safety tests and the IM tests, even though these tests may often be contained in the same sy