SANS 1173-2006 国外国际标准.pdfVIP

ICS 53.040.20 SANS 1173:2006 ISBN 0-626-17549-6 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD General purpose textile-reinforced conveyor belting Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za © Standards South Africa SANS 1173:2006 Edition 2.1 Table of changes Change No. Date Scope Amdt 1 2006 Amended to update referenced standards, to correct the cross- referencing, to include type C belting and delete reference to type X belting, to delete reference to PVC in 4.4.1 and table 3, to clarify the title of table 5, and include reference to transverse directional cutting in 6.4.2, and to delete referenced standards from the bibliography. Abstract Covers general requirements for textile-reinforced conveyor belting designed for use on flat or troughed idlers. The belting is classified according to the minimum full thickness breaking strength of the finished belting in kilonewtons per metre (kN/m). Speciality belting, such as heat resistant belting, oil resistant belting, and belting suitable for use on elevators and food conveyors, is not covered. Does not specify data for design of belting installations; for information refer to the manufacturers catalogue. Keywords adhesion, breaking load, construction, conveyor belts, deflection tests, density, density