木跳板动火要求.pptVIP

防火计划 适用于所有在满堂管廊吊架木跳板平台上热工作的要求 目录 1 目的 2 范围 3 参考 4 计划和要求 5 看火人职责 6 检查与审核 1.0 目的 随着管廊上管线安装的开始，在吊架木跳板平台上的热工作与日俱增，为杜绝和减少火灾风险和损失，所有在木跳板脚手架平台的热工作都要遵守此规定。（热工作包括： 电焊、气焊、打磨切割等） With the piping erection on pipe rack, more and more hot works will be carried out above the suspension wooden platform, in order to reduce the fire risk and mitigate the lost, all hot work activity on wooden deck shall be strictly controlled according to this plan. 2.0 范围 凡是从事此计划范围内的作业的施工班组、工区，要求严格执行此类规定。 All construction team who involved in hot work shall be familiar with this plan and make adequate preparation prior to work commencing. 4.0 计划和程序Plan and procedure 4.1 消防培训Fire prevention Training 凡是在木跳板平台上进行热工作的员工要求都参加防火和消防培训，所涉及工种：电焊工、管工、监督人员、辅助工种Employees involved working on the full boards scaffold platform are required to participate fire prevention and fire fighting program training, this includes: welder\ pipe fitter\supervisors\general worker 热工作时必须安排指定的看火人全程看护，看火人必须参加防火培训并证明是合格人员。 Nominated / dedicated Fire Watchers are competent and participate fire prevention and fire fighting training. 所有参加该工作的员工要求通过培训或每日的工作指令会议熟悉该计划。Employees involved shall be familiar with this plan via training and TBT. 防火意识和更新培训应定期进行，保证每季度至少一次。Fresh Training about hot work safety will be held frequently to improve awareness or according to analysis of field real condition.  员工要求清楚的了解并掌握：Employees must know the location and, have been trained in the correct use of: 正确使用消防设备，如使用灭火器、布置消防桶Fire extinguishing equipment. 如何回报火险和火灾事件How to report fire incident. 每个作业区的逃生路线和消防通道Escape routes and fire exits. 紧急集合点的位置Muster points. 警报响后，关闭正在使用的机械设备Equipment stopping once the alarm activate. 4.2 消防设备的配备Fire prevention facility and provision 要提供充足的消防设施，例如：灭火器、消防水桶、防火布、防火毯、接火盆等，所有设施都要求完好合适Sufficient fire prevention facilities such as: fire extinguishers, fire water barrels, fire retardant blanket, sparks containers /boxes, shall be adequate and sufficient.