硼钢板热处理辊底炉控制系统设计-毕业论文（设计）.docVIP

哈尔滨工业大学本科毕业设计（论文） PAGE \* MERGEFORMAT I 摘 要 随着汽车工业的发展，对于车身的钢板热处理加工也随之不断发展，热冲压技术就是基于这种背景下发展起来的本论文针对热冲压生产线的热处理部分做出了对应的控制系统，其中包括硬件设计和软件设计。 首先对整个控制系统所要实现的逻辑功能进行设计，针对需要完成的任务目标来设计整个控制系统的功能和工作过程。硬件设计部分介绍了整个控制系统需要的元器件，通过电气CAD绘制出了对应的电气原理图和各个端口之间的连接，同时做出完整的明细表。软件部分完成了控制系统SIMOTION和驱动单元SINAMIICS的配置，根据需要实现的逻辑使用MCC编程语言做出了对应的程序，最后根据整个系统的功能需要完成了人机界面的设计。 关键词：热处理；电气原理图； SIMOTION；MCC编程语言： 人机界面 各位如果需要此设计的全套内容（包括二维图纸、中英文翻译、完整版论文、程序、答辩PPT、视频）可加QQ695939903，如果需要代做也请加上述QQ,代做免费讲解。 Abstract With the development of automobile industry, for processing also will continue to develop hot plate body processing, hot stamping technology is based on the context of the development of the heat treatment part for hot stamping production line to make the corresponding control system, including hardware design and software design. The design of logic function firstly according to the control system to realize the function and working process, according to the need to complete the mission objectives to design the whole control system. The hardware design part introduces the need of the whole control system components, through the electrical CAD drawing out the connection between the electrical schematic diagram and the corresponding to a port, and make a complete list. The software part completed the control system of SIMOTION and SINAMIICS drive unit configuration, according to the need to implement the logic using the MCC programming language has made the corresponding procedures, according to the function of the system needs to complete the design of the man-machine interface. Keywords: Heat treatment, Electrical schematic diagram, SIMOTION, The MCC programming language, HMI 目 录 TOC \o 1-3 \h \u HYPERLINK \l _Toc13211 摘 要 PAGEREF _Toc13211 I HYPERLINK \l _Toc9240 Abstract PAGEREF _Toc9240 II HYPERLINK \l _Toc7834 第1章 绪 论 PAGEREF _Toc7834 1 HYPERLINK \l _Toc11448 1.1 课题背景及研究的目的与意义 PAGEREF _Toc11448 1 HYPERLINK \l _Toc496 1.2 国内外研究现状及分析 PAGEREF _Toc496 2 HYPERLINK \l _Toc25403 1.3 本文