cuinse 2cds薄膜太阳电池组件的研制与分析word格式论文.docxVIP

提要淌着 Cu阳ω 薄膜太阳电池的崛起，多国光伏界都在尝 试进行 CulnSe2/CdS 太阳电池集成化、产业化的实验，并均已取 得鼓舞性进展。目前，我国还没有这方面的研究与尝试单车论文 就是在总结我实验室多年来对 CulnSe2/CdS 薄膜太阳电池研制经 验的基础上着手进行对纽件研制的尝试。本论文的主要工作集中在对 CuInSe2/CdS太阳电池纽件结构 的设计、工艺路线的尝试、实验结采的分析和讨论等方面。可民据 实验室的条件设计的激光切割 Mo 层与模具定位随后的各材料层 相结合的工艺路线避免了对 CuInSe2+CdS层和 AI层的切割。实 验结果已基本达到了预定的目标。本论文还对影响屯池纽件性能 的 CdS 层的制备及其光电特性等进行了广泛的实验与分析，给出了影 响电池特性的 CdS 层的各参数范围。论文最后分析了我们CIS/C邮 电池对返火工艺的特有的敏感性问题，并从返火工艺中试述了影 响 CIS 膜的一些因素。y在纽件的结论部分，提出了对 CIS/CdS 太阳电池纽件和j 备工 艺一系列的改进措施，并展望了 CIS/CdS 薄膜太阳电池的集成化、 产业化的美好前景关键词:CulnSe2/CdS太阳电池纽件，工艺路线，激光切割，膜具定位 ，IABSTRACTWith the rise of CulnSe2/CdS thin-film solar cells， attempts towards íntegrity and productíon in this solar cell have been carríed out in the photovoltatíc world in many countries ，and some encouraging results have been obtained already. However ，there is no such attempt and research in ourιountry This paper was started to study and fabricate this type module based on the summarízìng the experíences from fabrication and analysis of CulnSe2/CdSsolar cells in past years ín our labThe maìn work of the paper is focused on the designing the structure and process route of fabrication of the module ，analyzíng and díscussíng the results of the experiments ，etc. The process route，connection laser scribing on the 孔10 layer with locating the subsequent layers with the models ，was designed to avoídscribíngontheCIS+CdSlayerandAIlayer. Sofar，theresultsfromtheexperiments ímply the aim of research has basically been attained . In the paper ， the preparation and optical and electrical characteristics ofCdS material are also analyzed and optimized through a large numberof experiments ，and the rangesof parameters ，suitable tothe cells andmodules ，are gíven.Attheendof thepaper ，the special sensitivity to the annealing of our CIS/CdS cells is analyzed ， and some factors affecting CIS films are also discussedaccording to annealíng process.At the end part of the conclusion of this modules ，a series of improving measures are provided ，and a