Procast内部教程（Getting started系列）离心铸造.pptVIP

Copyright ? ESI Group, 2009. All rights reserved. Copyright ? ESI Group, 2009. All rights reserved. Copyright ? ESI Group, 2009. All rights reserved. Getting started with ProCAST (Vertical Centrifugal Casting set up) Getting started with ProCASTOutlines The goal of this tutorial is to show a typical ProCAST set up for Vertical Centrifugal Casting process. Process : Transfert time (preheat to casting furnace) : 15s Filling time : 15 s Duration of filling : 1 s Preheat temperature : 1200 °C Casting temperature : 1850 °C Available files are : Model.mesh : 3D surface mesh of the model Centrifugal_d.dat : Final tutorial ProCAST data file Centrifugal_p.dat : Final tutorial ProCAST run parameters file 1 Getting started with ProCASTLoading files 1 Use the explorer to go to the right location 2 Input case which will be automatically loaded 3 Click on the PreCAST Menu 2 Getting started with ProCASTLoaded Model 1 An ??Input ?Mesh Data ? window allows you to get info about the model 2 Use these icons for geometric/rendering operations 3 Getting started with ProCASTMaterial Assignment 1 Menu Material?Assign 2 Assign material using the material database 3 Define the material type 4 Empty cavity ? 5 And repeat the operation for each material … 4 Getting started with ProCASTInterface definiton 2 Material pair order (casting in first column (red), others in second column (green)) 3 Type of interface ? 4 Interface assignement using the interface database 6 Finally, Apply 5 And repeat the operation for each interface 1 Menu Interface 5 Getting started with ProCASTBoundary Conditions - Heat 1 Menu Boundary Conditions ??Assign Surface?? 2 Add a Heat BC 3 Select area where to apply BC 4 Store the selected area 5 Assign the BC using the BC database 6 Getting started with ProCASTBoundary Conditions - Wall 1 Add a Wall BC 2 Select area where to apply BC 3 Store the selected area 7 Getting started with ProCASTBoundary Conditions - Velocity 1 Add a Velocity BC 2 Selec