OPNET配置VC环境变量.pdfVIP

OPNET 配置配置VC 环境变量环境变量 配置配置 环境变量环境变量 OPNET 底层采用VC 做为编译环境，在安装OPNET 软件前需要正确配置VC 环境变 量。下面分别为VC6, Visual Studio .NET 2003, Visual Studio .NET 2005, Visual Studio .NET 2008 注册环境变量需要注意的内容。 1 VC 6 安装时勾选上 “注册环境变量”后，就不需要如下步骤。如果没有注册则需要手动 设置。 Question: What are the proper system environment settings for Microsoft Visual C++ (MSVC) 6.x? Answer: This FAQ is provided as a courtesy for OPNET users to help with the initial configuration of Microsoft Visual C++; OPNET Technical Support does not officially support system administration for non-OPNET products. The following variables need to be specified for proper operation of MSVC++ with OPNET. (Depending on how MSVC was installed, these variables may have already been set by the MSVC installation process). You will either have to append these variables to existing variables (such as for path) or create new ones if they do not already exist. To create a new variable, type the name in the Variable field and its value in the Value field and then click the Set button. The variables can be accessed by navigating through the following sequence: On Windows NT: Start - Settings - Control Panel - System - Environment On Windows 2000 and Win XP: Start - Settings - Control Panel - System - Advanced - Environment Variables Each time a variable is updated, you need to click the Set button for the changes to take effect. Once all of the changes have been made, click OK to close the dialog box. These instructions were derived from the file C:\Program Files\Microsoft Visual Studio\VC98\BIN\VCVARS32.bat Note that for some systems, the 8.3 format must be used in order to see proper behavior (e.g. C:\PROGRA~1\MICROS~1\Common\Tools). Note also that spaces should not be used immediately after