工程建设行业标准《建筑物倾斜纠偏技术规程》征求意见稿（条文和条文说明）2010-8-18.docVIP

UDC JGJ 中华人民共和国行业标准 建（构）筑物纠倾技术规程 Technical specification for incline rectifying of buildings 《征求意见稿》 20××-××-××发布 20××-××-××实施 中华人民共和国住房和城乡建设部 发布 前　　言 根据建设部[2008]第1号要求本总则术语本由建设部，有限公司有限公司（510665）。本有限公司有限公司本1　总则 2术语3　基本规定 4　检测与鉴定 4.1　一般规定 4.2　检测 4.3　鉴定 5　纠倾设计 5.1　一般规定 5.2　纠倾设计计算 5.3　迫降法设计 5.4　抬升法设计 5.5　综合纠倾法设计 5.6　古建筑纠倾设计 5.7　防复倾加固设计 6　纠倾施工 6.1　一般规定 6.2　迫降法施工 6.3　抬升法施工 6.4　综合法纠倾施工 6.5　古建筑纠倾施工 6.6　防复倾加固施工 7　施工监测 7.1　一般规定 7.2　沉降监测 7.3　倾斜监测 7.4　裂缝监测 7.5　水平位移监测 7.6　其它监测 8　工程验收 附录A　常用纠倾方法选择 附录B　建（构）筑物纠倾工程施工监测记录 附录C　建（构）筑物纠倾工程竣工验收记录 引用标准 CONTENTS 1　General provisions 2　Terms and symbols 2.1　Terms 2.2　Symbols 3　Basic requirement 4　Inspection and qualification 4.1　General requirement 4.2　Inspection 4.3　Qualification 5　Design for incline rectifying of buildings 5.1　Genaral requirement 5.2　Design and calculation 5.3　Design for incline rectifying by forced settlement method 5.4　Design for incline rectifying by uplifting building method 5.5　Design for incline rectifying by composite methods 5.6　Design for incline rectifying of historic buildings 5.7　Strengthening design for preventing bulidings from tilting again 6　Construction for incline rectifying of buildings 6.1　Genaral requirement 6.2　Construction for incline rectifying by forced settlement method 6.3　Construction for incline rectifying by uplifting method 6.4　Construction for incline rectifying by composite methods 6.5　Construction for incline rectifying of historic buildings 6.6 Strengthening construction for preventing bulidings from tilting again 7　Monitoring for construction of buildings 7.1　Genaral requirement 7.2　Monitoring of settlement deformation 7.3　Monitoring of inclination deformation 7.4　Monitoring of crack 7.5　Monitoring of horizontal displacement 7.6　Other monitoring 8　Completion acceptance Appendix A　 Selection of general incline rectifying methods Appendix B　 Monitoring record for construction of incline rectifying of buildings Append