年产600万平米瓷质墙地砖生产线联合车间工艺初步设计—毕业设计_精品.docVIP

X X X X 大 学 毕业设计 题 目 年产600万平米瓷质墙地砖生产线联合车间工艺初步设计 学 院 材料科学与工程学院 专业班级 无机非金属材料工程 学生姓名 指导教师 成 绩 2010年 5 月 20 日 摘 要 本设计题目为：年产墙地砖生产线Abstract The Initial craft design of the raw material workshop in the factory producing 6000 000 square meters structural ceramics introduces in Joint Section of the preliminary designworkshop production process of the 800×800 mm standard floor tile strict proof has been carried on each working procedure in the raw material after it’s entering the plant, and full explanation has been taken on the working and the shaping principle of the major equippment needed during the production process. This design takes the technological advance the practical economy and energy saving energy as a principle, I have consulted each kind of theoretical materials,and after carrying on some market investigation and study, and I finally made the design. This design has the merit of high in automaticity, labor productivity and economic efficiency. This topic is about the design of ordinary architectural ceramic production line. In order to make the production of ceramic market more competitive, the selection of raw material and process control puts forward higher requirements so it will become the difficult of this topic. In material selection, it will use in the advantage of site traffic convenience by optimization of raw material makes up. This will effectively guarantee the product of hard Numbers. In process control, this design will use advanced ceramic production equipment, technology and quality inspection way. Key words：Constraction ceramics；Joint production line；Technological design 摘要…………………………………………………………………………………………Ⅰ Abstract………………………………………………………………………………………Ⅱ 第1章 绪论…………………………………………………………………………………1 1.1 选题的依据…………………………………………………………………………1 1.2 建设规模，产品方案，质量标准…………………………………………………1 1.3 本设计的指导思想及遵循的原则…………………………………………………2 1.3.1 指导思想………………………………………………………………………2 1.3.2 遵