塑料弯头注射模的设计.docVIP

编号： 毕业设计说明书 题 目： 塑料弯头注射模设计 学 院： 专 业： 机械设计制造及其自动化 学生姓名： 全套图纸 详询 学 号： QQ 1395589499 指导教师： 职 称： 题目类型： 理论研究 实验研究 工程设计 工程技术研究 软件开发 2010年 05 月 15 日 摘 要 本文阐述了90度塑料弯头的产品设计及其注射模的总体设计过程。首先分析了产品结构特点与使用性能，以及所用塑料的组成与工艺特性，塑料成型工艺特点，分析了塑料件的形状特点、尺寸大小、尺寸标注方法、精度要求、表面质量和材料性质等因素。其次对注射机的选用及其参数校核、模具型腔的确定、分型面的选择、浇注系统设计、排气系统、温度调节系统、成型零件结构设计、侧向分型与抽芯机构设计、结构零部件的设计、导向与推出机构设计以及主要成型零件的加工工艺等方面作了详细的介绍。在设计过程中也进行了大量的计算，包括对注射机的锁模力、最大注射量、注射压力、成型零件尺寸的计算和模具开模行程尺寸校核以及模具与注射机安装部分相关尺寸的校核等。在设计过程中运用了PRO/ENGNEER系统软件对塑件进行三维造型，并对塑件进行分模和大量的建模分析。用CAD绘图软件进行了工程图的绘制工作。 关键词：注塑模；注射机；浇注系统；型芯；液压系统。 Abstract This paper describes a 90-degree bend in the product of design and plastic injection mold of design process. First analysis of the product structure characteristics and performance, and the plastic composition and technical characteristics, plastic molding process characteristics of the plastic parts of the shape features, size, dimensioning methods, accuracy, surface quality and material properties and other factors. Second, the choice of injection machine and its parameter calibration, the determination of mold cavity, the choice of sub-surface, casting system, exhaust system, temperature control system, forming part structural design, lateral type Pulling Mechanism Design structural components of the design, orientation and design and launch of the main molding body parts such as the processing technology were described in detail. In the design process also had a lot of computation, including injection molding machine clamping force, the maximum injection quantity, injection pressure, molding parts and die size of the calculation of stroke size mold and mold and injection machine check to install some of the relevant dimensions proof, and so. In the design process using the PRO / ENGNEER system software on the plastic three-dimensional modeling, and plastic parts