多次回焊处理对添加过渡金属元素Sn-Ag-CuBGA锡球接点-YOKE.PDF

多次回焊处理对添加过渡金属元素Sn-Ag-CuBGA锡球接点-YOKE.PDF

  1. 1、本文档共5页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
多次回焊处理对添加过渡金属元素Sn-Ag-CuBGA锡球接点-YOKE

多次迴銲處理對添加過渡金屬元素Sn-Ag-Cu BGA錫球接點組織影響 The influence of multiple reflowing on the microstructure of the BGA joints with transition metal-containing Sn-Ag-Cu solders a* a b b 劉耀仁 、宋振銘 、賴逸少 、邱盈達 、 a b 國立東華大學 材料科學與工程學系,Advanced Semiconductor Engineering Group (Central Labs) Yau-ren Liu a*, Jenn-ming Song a, Yi-shao Lai b, Ying-da Chiu b a Department of Materials Science and Engineering, National Dong-Hwa University, Hualien 974, Taiwan b Advanced Semiconductor Engineering Group (Central Labs), Kaohsiung 811, Taiwan. 摘要 content of about 2.5at% was found at the interface 本研究針對Sn-Ag-Cu BGA錫球添加少量 Ni 、Co 、 of SAC-Co joints. Worthy of notice is that with Zn (簡稱 SAC-Ni, SAC-Co, SAC-Zn)對其與Cu/Ni-P/ the addition of Co the consumption of Ni-P Au 基板進行多重迴銲後觀察銲點組織變化影響。實驗 substrate was greater than the other samples and the 結果顯示 SAC及 SAC-Zn 接點介面主要生成簇晶狀 crystalline Ni3P layer adjacent to Ni-P substrate was (Cu , Ni ) Sn ,而SAC-Zn者有極微量之鋅 (約 discrete. 0.6 0.4 6 5 0.1wt%)固溶; SAC-Ni 接點介面於首次接合時生成則 Keyword: Lead-free solder, Sn-Ag-Cu, multiple (Cu , Ni ) Sn ,經多次迴銲後轉為層狀之(Ni , reflow. 0.6 0.4 6 5 0.84 Cu ) Sn ;SAC-Co 接點介面生成含2.5at%Co 之(Cu , 一、前言 0.16 3 4 0.6 Ni ) Sn ,形貌較連續圓鈍,特別的是其Ni-P 基材消 在電子封裝之銲錫材料中以錫鉛合金最廣為受 0.4 6 5 耗較明顯,Ni3P層則出現破碎情形。 用,因其穩定的機械性質、良好之銲錫性且已使用多

文档评论(0)

wumanduo11 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档