STEEL FABRICATION SSINA（钢铁制造SSINA）.pdfVIP

D E S I G N E R HANDBOOK STAINLESS STEEL FABRICATION Stainless Steel The Value ® Option TABLE OF CONTENTS General1 Characteristics of Stainless Steel2 Fabrication Properties2 Drilling 2 Cutting2 Mechanical 3 Shearing3 Circle Shearing4 Sawing 4 Blanking, Punching, and Nibbling5 Abrasive Cutting6 Thermal6 Flux Cutting6 Arc Cutting 7 Plasma Arc Cutting7 Bending8 Springback 8 Types9 Press Brakes 9 Roll Bending9 Roll Forming9 Stretch Forming10 Descaling 10 Removal of Oxide Scale10 Pickling Solutions 10 Blasting 10 Removal of Weld Discoloration 10 Passivation 10 Finishing11 Grinding, Polishing Buffing 11 Care in the Shop11 Handling 11 Contamination12 Cleaning 12 Rust Contamination12 Cleaning Methods 12 The Specialty Steel Industry of North America (SSINA) and the individual companies it represents have made every effort to ensure that the information presented in this handbook is technically correct. However, neither the SSINA nor its member companies warrants the accuracy of the information contained in this handbook or its suitability for any general and specific use. The SSINA assumes no liability or responsibility of any kind in connection with the use of this information. The reader is advised that the material contained herein should not be used or relied on for any specific or general applications without first securing competent advice. 4-99-5 GENERAL Stainless steel is not a single alloy, but rather th