Sliding Gate Operator User’s Manual Aleko （滑动门操作员用户手册阿）.pdfVIP

Sliding Gate Operator User’s Manual Model: AC1400 www.AlekoG 7106 S 220th St Kent WA 98032 AC1400 SLIDING GATE OPERATOR OUTLINE 1. Important safety precautions………………………2 2. Main features ………………………………………2 3. Main technical parameters ………………………2 4. Necessary Tools ……………………………………3 5. Site Preparation ……………………………………3 6. Mechanical Installation ……………………………4 7. Electrical ……………………………………………7 8. Tuning and operation ……………………………10 9. Check ………………………………………………14 10. Maintenance ……………………………………14 11. Trouble Shooting ………………………………15 1 AC1400 SLIDING GATE OPERATOR 1. Important safety precautions Carefully read and follow all safety precaution and warnings before attempting to install and use sliding gate operator, incorrect installation can lead to severe injury. Installing the AC1400 gate operator requires installation of standard 110V electrical wiring. This work should only be performed by a trained technician. Miswiring could cause personal injury or DEATH. To prevent the risk of electrocution, be sure to turn off all power to the AC1400 until installation is complete. The gate operator should be installed by a qualified technician; otherwise, serious personal injury or property damage may occur. Before installation, the clutch should be unlocked. The auto-reverse function must be checked during installation to ensure that the gate can auto-reverse in the event of obstruction. This auto-reverse function should be regularly inspected and adjusted, if necessary. When opening or closing the gate, do not attempt to walk or drive through the gate. Do not touch the gate while it is in operation. Children should not be allowed to play near or operat