Slings ASME（索具ASME）.pdfVIP

ASME B30.9-2010 (Revision of ASME B30.9-2006) Slings Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings A N A M E R I C A N N A T I O N A L S T A N D A R D ASME B30.9-2010 (Revision of ASME B30.9-2006) Slings Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings A N A M E R I C A N N A T I O N A L S T A N D A R D Three Park Avenue • New York, NY • 10016 USA Date of Issuance: January 18, 2011 The next edition of this Standard is scheduled for publication in 2013. This Standard will become effective 1 year after the Date of Issuance. There will be no addenda issued to this edition. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are published on the ASME Web site under the Committee Pages at as they are issued. Interpretations will also be included with each edition. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent right