Slew Drive nstallation and Maintenance Manual （杀了驱动nstallation和维护手册）.pdfVIP

V.0 1 – MAY 2014 . UNIT CODE: T A XXX – ZB – CD T: TGB Group Slew drive A: Slewing ring structure X: Size B: Other characteristics With encoder output 0 1, 2, … Other special configurations Ø25mm shaft entrance C: Side of motor installation L Left side R Right side D: Threads M Metric threads I Imperial threads Notice • The following text includes notices and procedures which should be observed when installing the slew drives and during the maintenance. • Read carefully this manual before any operation is performed. The working features can only be ensured if the steps have been followed correctly. • All steps listed below must be carried out by qualified personal. • This manual should be kept near the structural element and has to be always accessible to the personal. • The purchaser is responsible for protective measures and installation of all the equipment. • Please contact our technical department for any further assistance. • The technical data for each slew drives can be found in our product catalogue. TGBgroup - 1 - . INDEX 1. Transport, handling and storage provision - 3 - 2. Installation - 3 - 2.0 Previous checks - 3 - 2.1 Clean the slew drive and the mounting structure - 3 - 2.2 Determine permissible flatness deviation δp and perpendicularity deviat