Landfill Digester Gas Dryers Glauber（垃圾填埋气烘干机格劳伯消化池）.pdfVIP

Landfill Digester Gas Dryers Landfill gas is generated by the anaerobic decomposition of organic matter deposited in landfills. Digester gas is produced as a by-product of the digestion of sewage sludge. The effluent gas consists mostly of methane and carbon dioxide together with water vapor and minor quantities of organic compounds. The Airtek Energy Services (AES) Landfill/Digester Gas Dryers remove moisture and impurities so the gas can be utilized as fuel source for industrial heating, power generation or steam production. Whatever your landfill/digester gas volume may be,AES can custom build a dryer to your specifications. Features and Benefits Patented Smart Cycle control reduces energy consumption and maintains a constant dew point by loading and unloading or by turning refrigeration compressor on or off in direct response to the actual dew point temperature of the gas. Patented dew point sensor precisely monitors the temperature of the gas. The gas temperature is prominently displayed on the control panel. Patented Flood Level Control increases dryer efficiency and protects refrigerant compressor from floodback. Fully active flooded shell efficiency, can act as a ballast which can sustain temporary overloads or spikes. Non-fouling heat exchangers are standard with stainless steel tubes Modular construction for easy servicing. Tube sheets have precision milled grooves for leak proof joints and greater mechanical strength. Stainless steel moisture separator with stainless steel Mist Eliminator pad, 99.9% efficient @ 5 micron and larger. Diagnostic display panel includes: Shutdowns with common alarm and dry contact for high dew point, low refrigerant, and refrigeration system interruption. Electronic Demand Drain does not expel gas to atmosphere. A drain alarm warns of any malfunction. NEMA 4 is standard, optional Z purge, NEMA 7 and 9 class wiring available