FUNDAMENTALS OF WELDING（焊接原理）.pdfVIP

FUNDAMENTALS OF WELDING 1- INTRODUCTION The term joining is generally used for welding, brazing, soldering, and adhesive bonding, which form a permanent joint between the parts —a joint that cannot easily be separated. The term assembly usually refers to mechanical methods of fastening parts together. Some of these methods allow for easy disassembly, while others do not. We begin our coverage of the joining and assembly processes with welding, Welding is a materials joining process in which two or more parts are coalesced at their contacting surfaces by a suitable application of heat and/or pressure. Many welding processes are accomplished by heat alone, with no pressure applied; others by a combination of heat and pressure; and still others by pressure alone, with no external heat supplied. In some welding processes a filler material is added to facilitate coalescence. The assemblage of parts that are joined by welding is called a weldment. Welding is most commonly associated with metal parts, but the process is also used for joining plastics. Our discussion of welding will focus on metals. Welding is a relatively new process (Historical Note 29.1). Its commercial and technological importance derives from the following: 1- Welding provides a permanent joint. The welded parts become a single entity. 2- The welded joint can be stronger than the parent materials if a filler metal is used that has strength properties superior to those of the parents, and if proper welding techniques are used. 3- Welding is usually the most economical way to join components in terms of material usage and fabrication costs. Alternative mechanical methods of assembly require more complex shape alterations (e.g., drilling of holes) and addition of fasteners (e.g., rivet