Fixing, Finishing and Storage Nelson Pine（修改、整理和存储纳尔逊松）.pdfVIP

下载本文档

7
0
约1.63万字
约 3页
2017-09-02 发布于浙江
举报
版权申诉

Fixing, Finishing and Storage Nelson Pine（修改、整理和存储纳尔逊松）.pdf

1、有哪些信誉好的足球投注网站（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

Fixing, Finishing and Storage Nelson Pine（修改、整理和存储纳尔逊松）

12 Fixing, Finishing and Storage Machining Screw Position GoldenEdge MDF Panels can be worked easily with standard The position of screws inserted into the faces and edges of wood working machinery. The homogenous nature of MDF should be decided in relation to board thickness and GoldenEdge ensures that a good finish can be achieved on screw size. Screws inserted into the edges should be not the edges. less than 25mm from the corners. Tungsten carbide cutters and saws are recommended. Screw Tension Laminating The screw must not be overtightened as further turning will Because of its light colour GoldenEdge MDF is an ideal reduce the holding strength. substrate for laminating with natural wood veneer, vinyls, Screw Withdrawal Strengths printed papers, foils and melamine papers. To illustrate the holding power of screws in GoldenEdge A balanced laminated panel would eliminate minor cupping MDF the forces required to withdraw typical parallel thread or bowing. screws in an axial direction from 16mm GoldenEdge MDF Care must be taken to ensure that conditions of very high faces and edges are given below. press pressure, high press temperature and long press times do not exist during laminating. Screw Gauge D