Flexibility In Action Stryker（行动的灵活性Stryker）.pdfVIP

Flexibility In Action ACL Instrumentation ACL Tunnel-Preparation Instrumentation Set Reproducible graft placement with stable fixation. Stable ACL Tunnel-Preparation The Stryker Universal ACL Instrumentation System has been developed to be utilized with a variety of anterior cruciate ligament (ACL) reconstruction techniques. With the Stryker Universal ACL Instrumentation System and endoscopic surgical technique, it is possible to obtain more reproducible anatomical graft placement and stable fixation - the desired goal of ACL reconstruction. Tibial Guide » Three slide choices for surgeon preference (double point fork, elbow, single point fork). » Angle calibrations for more accurate tunnel placement. » Bolt calibrated every 10mm for measuring tibial tunnel length. Choose precision Stryker’s Tibial Guide provides three different slide choices for surgeon preference. The bolt assembly has laser marks for more precise tibial tunnel length. Femoral Aimers » Five sizes, allowing a 1mm or 2mm back wall for any size tunnel. » Can be used in anteromedial portal or transtibially. Precise Anatomical Placement Set of five Femoral Aimers (also called offset guides) allow for precise anatomical placement of femoral tunnels by referencing the over-the-top position (Note: can be used through medial portal or transtibially). Five sizes (4, 5, 6, 7, 8mm aimers) provide a 1-2mm tunnel back wall when used with the appropriately sized reamer. For example, a 7mm Femoral Aimer used with a 10mm diameter reamer leaves a 2mm back wall. (Formula: ½ tunnel diameter + back wall) 3-Fluted Acorn Reamers » Special tri-flute design for an