手机验货标准(中英文).docVIP

手机验货标准 Cell phone Inspection Standard 目的Purpose 为了使我司手机产品品质能满足客户要求，为检验提供依据，特制定本标准。 In order to make our product quality to meet our customer requirement and offer a standard for inspection so we created this document . 范围Scope DXC所有手机产品 For all DXC cell phone 职责Responsibility QC-----负责按此标准执行检验及判定，将结果知会相关人员 QC is responsible for inspection product and result , send the information to other relative people. OS-----负责提供验货样品及相关必要的信息，通知QC验货 OS is responsible for supplying a sample and necessary information . Inform QC inspection. CM----负责最终出货的判定 CM is responsible for the final judgment on shipping 术语定议(Define) 缺陷定义 请参考《QC English Wording Reference》 文件编号QC-S-V1-007 Refer to 《QC English Wording Reference》Document NO.: QC-S-V1-007 4.2 等级面定义(Classification) I 级面: 最终用户在正常使用过程中经常看到的面,如正面 Class I: Final customer will see the side obviously when use it, such as the right side II 级面: 最终用户在正常使用过程中偶尔看到的面,如侧面、背面 Class II: Final customer will see the side occasionally when use it, such as the side face or the back. III 级面(Class III): 最终用户在正常使用过程中看不到的面,如产品内部 Class I: Final customer won’t see the side when use it, such as inside 4.3 常用代码(General Code) Code Definition（Unit） Code Definition（Unit） N Number D Diameter(mm) L Length(mm) H Height(mm) W Width(mm) T Tolerance 检验条件(Inspection Conditions) 光照:60W冷白荧光灯，距工作台1M 或同等光照强度条件 Illumination：60W fluorescent lamp ,the distance from worktable is 1M or equal condition 检验员与产品距离(Distance between inspector and product ): 20mm-30mm 观测角度: 视线与被检测产品表面成45°~90°角 Inspection angle: 45°~90°the way refer to the right picture; 观测时间(Observation Time): 3-5seconds 抽样方案 Sampling plan 参照附档A执行抽验 Refer to Appendix A 手机检验标准 Cell phone inspection standard 7-1一般要求 General requirement 任何尖锐的点或锋利的边缘都视为严重不良,起泡以及任何暴露底材之外观缺陷均视为重要不良,任何直径小于0.05mm的缺陷视为看不见. Any sharp point or side is critical defect, blister and any cosmetic defects that exposed the substrate are major, any defects of which ,the diameter is less than 0.05mm is invisible 聚集在一起的短而密的刮痕可视