触摸密码读ID卡柜锁可变密码.DOCVIP

User Manual of EM Code Locker Lock There are two modes available for choosing in EM code locker lock: Public Mode and Home Mode. There are two unlocking methods for choosing: single-unlocking method and double-unlocking method Part 1: EM Code Locker Lock in Public Mode Lock in publick mode has: 1 group of master password, 1 group of temporary password, 1 master card and 1 temporary card. Password: 4~15 bits Default Status: Press the reset button on PCB for 5 times constantly, lock would turn into default status: Master password: Lock in Home mode, Single unlocking method. Swift Lock mode from Home mode to Publick mode: Master Password + Key button + 7 + Key button: Lock is shift into Public mode and in Keep-open state. Operations: Master card and Master password setting: (Lock in Keep-open state and in Locked-state both workable) Adding Master card: When lock in Default status, the first card read by the lock reader is the master card. Changing Master Password: Original master password + Key button + 1 + New Master password + Key button + Confirming new master password + Key button Adding temparary Password and card: Adding temparary password (when lock with single-unlocking method) New Password + Key button + confirming new password + Key button: After this operation, lock would be closed. Adding temparary card (when lock with single-unlocking method) Take any EM4100 card to be ready by the lock sensor: After this operation, lock would be closed. Adding temparary password and card (when lock with double-unloking method) New password + Key button + confirming new password + Key button, then swipe an EM card: After these operations, lock would be closed. Swipe an EM card, then put in new password + Key button + confirming the new password + Key button: After these operations, lock would be closed. These two ways are both for adding temparary password and card to open lock together. Lock setting: Shifting between Home mode and Public mode