国际劳工组织1Gb的MP3播放器外部音量键和HOLD开关更换-iFixit.PDF

ilo 1Gb Mp Player External volume button and hold switch Replacement ilo 1Gb Mp3 Player External volume button and hold switch Replacement How to remove and replace the rocking volume button and the hold switch. Written By : Joe © iFixit — CC BY-NC-SA www.iFixit .com Page 1 of 8 ilo 1Gb Mp Player External volume button and hold switch Replacement INTR DUCTI N The Volume button is a rocking button held on by a central axis in the button socket. The hold switch internally is four plastic clips that slide along the edge of its socket. T LS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1) © iFixit — CC BY-NC-SA www.iFixit .com Page 2 of 8 ilo 1Gb Mp Player External volume button and hold switch Replacement Step 1 — Belt Clip  Remove the belt clip by pulling the clip casing up and away from the device starting at the top over the slightly protruding headphones jack. Step 2 — Battery Cover  Remove the battery cover by gently pushing inward on the arrow on the cover.  While maintaining pressure push the cover upward. © iFixit — CC BY-NC-SA www.iFixit .com Page of 8 ilo 1Gb Mp Player External volume button and hold switch Replacement Step 3 — Battery  Remove the Battery from the socket  When installing the battery take note of the signs displayed