如何清洗电脑（How to clean a computer）.docVIP

如何清洗电脑（How to clean a computer） Before you clean the computer, first of all, you must turn off the power. It is quite dangerous to clean the computer when you turn on the power, and it may cause hardware damage. Lets first see what tools need to be prepared for cleaning computers. The tools listed here are not comprehensive. Theyre just tools for cleaning computers. Readers dont necessarily need to follow suit. - a soft cotton rag - glass or TV cleaner - alcohol - cotton sticks - screw driver - ear ball If the reader does not have the tools above, you can also find tools like that instead. For example, if you do not wash ear ball, you can use the bucket to replace, but be sure to blow out the cold air, otherwise it may lead to hardware damage. Display cleaning Clean display must be divided into two parts, one is to clean the screen of the monitor, and the other is to clean the shell of the monitor. When cleaning the monitor screen, use some cleaning agents for cleaning glass or tv. First, pour a portion of the detergent on a clean soft cloth. The rag is moist. Take care not to pour too much to prevent the detergent from dripping into the display. Then wipe the screen of the monitor with this soft cloth to achieve the purpose of cleaning. Usually, this kind of special cleaning agent can achieve ideal cleaning effect. Wipe the display housing Most displays are made of ivory. After a long period of use, they accumulate not only dust, but also dirt. I use the CRT display, because the work will heat out some heat, so the display behind the shell has many heat holes. These vents usually accumulate more dust and are the focus of cleaning. The author soaked the cloth first and then wrung it until it was no longer dripping. Wring is a particularly important step. Never let water drip from the radiator to the inside of the display. After cleaning the shell, I use the ear ball to clean the dust contaminated by the heat sink. When cleaning the display, do not open the monitors