质检部管理制度（Quality control department management system）.docVIP

质检部管理制度（Quality control department management system） Garment factory production product quality supervision and punishment for reference The lower and first parts of the production line must be convened by quality management department, technical department and related production Personnel for first examination, And make the first inspection record. Products that are not subject to first inspection shall not be continued The quality management department shall be responsible for all losses caused by the production. Production department, technical department, quality management department, workshop leader, team leader and checker should be established The idea of quality first shall be familiar with process standards and quality standards for the products being put into operation. No To reduce or relax at will. Substandard semi-finished products shall not be allowed to flow into the next link Batch) Such as the flow into the next link, the production team should undertake the responsibility of repair. One . Statistical leak detection rate One Rework allowed within the team Ten Per cent of the daily output per person Fines for the process 05 Yuan. Two The product flows into the next production link (pointing out the teams and groups) The rework rate is allowed Five %, press Daily output calculation, Fines for each team One Yuan. A fine for the inspector of the team Zero point five Yuan. Three Quality rework rate of team is over Ten %, handled by quality accident. Four The qualified rate of product after inspection is up to the reinspection group One hundred %, no rework rate. Check by finishing and quality check. Found a rework and fined the reinspection personnel One Yuan, tired Calculation. And let re examination team responsible for repair, Re examination team should carefully fill out each production team Inspection rate and rate of defective products. Read the membership Limited special privilege of 7 members immediately early adopters Five Repair items within