清洗槽由内槽和外壳组成（The cleaning tank is composed of an inner tank and an outer shell）.docVIP

清洗槽由内槽和外壳组成（The cleaning tank is composed of an inner tank and an outer shell） The tank cleaning tank and a casing. The outer surface of the inner groove (general appearance at the bottom of the groove) bonded ultrasonic transducer, tank cleaning liquid tank. Sheng generally made of stainless steel plate corrosion, too thick will affect the acoustic radiation. The inner wall of the groove, especially radiation plate adhered with transducer to flat polishing, not a wound, otherwise it is easy to produce cavitation corrosion, shorten the service life. To avoid cleaning the workpiece directly with the groove wall contact and scratch, with hollow basket (basket) or general support of cleaning hanging in the cleaning solution. The basket frame should be small and light, with stainless steel wire woven or made of other materials. The structure of reflected sound good to make the ultrasonic cleaning liquid flows easily blocked and small. Within the tank size according to the size and shape of parts cleaning and cleaning. The total surface area of the tank should not be greater than Volume. Stuck with the radiation plate transducer (such as slot floor) power strength under generally lower than 1.5 W / cm2 (with a piezoelectric transducer. Most should be in 0.5 ~ 1 W / cm2). The high strength will accelerate the cavitation corrosion of the radiation plate surface, at the same time due to severe cavitation the bubbles will affect the energy transfer, so far away from the radiation surface liquid space sound intensity becomes weak and can not reach the uniform cleaning purpose. In the ordinary cleaning tank, the liquid surface reflection, standing wave generated in the wash tank, the liquid space in some areas the small pressure (wave nodes). In some places the maximum sound pressure (antinode) caused by the clean degree of uneven. In order to reduce the formation of standing wave, sometimes cleaning tank shapes should be specially designed, or take other measures, such as swe