深圳维修监控（Shenzhen maintenance control）.docVIP

深圳维修监控（Shenzhen maintenance control） Shenzhen Futian Free Trade Zone, Sha Wei Shi Xia Xinzhou Cun \ \ \ \ Che Kung Temple \ Xiasha Zhuzilin maintenance monitoring Fault monitoring documents provided by the Shenzhen Shenzhen UTS computer installation and maintenance for computer monitoring UTS In a monitoring system is completed to enter the commissioning phase, commissioning phase before delivery, there may be a variety of faults, such as the common: not the normal operation of system is not up to the technical index, the design requirements of the overall performance and quality is not ideal, especially for a complex, large-scale monitoring the project is, it is can hardly be avoided, we need to make corresponding treatment to solve the problem, ensure the normal operation of the system. 1 monitor the power failure caused by incorrect equipment. The incorrect power generally has the following several possibilities: power lines or power supply voltage is not correct, the power is not enough (or a road supply line size is not enough, the big buck), transmission line power supply system of the short circuit, open circuit, instantaneous overvoltage etc.. In particular, equipment failures due to power supply errors or transient overvoltage have occurred. Therefore, in the system debugging, before power supply, we must seriously and strictly check and check, should not be taken lightly. 2. because some monitoring equipment has many links, if not handled well, especially with the equipment connecting lines are not handled properly, there will be open circuit, short circuit, wire insulation, as a result of adverse false wiring damage, the problem of declining performance equipment. In this case, according to the phenomenon of failure calmly analysis, to judge in a number of lines is due to what the connection of the line has problems, then produce that kind of fault. Therefore, special attention should be paid to the connection between the equipment and the various lines o