液压泵的相关资料（Related data of hydraulic pump）.docVIP

液压泵的相关资料（Related data of hydraulic pump） Working principle: the material enters the hydraulic sieve jigging machine trough through the feeding chute, the rocker drive device drives the sieve plate, and carries the animal material around the pin shaft to move up and down in the water. In the process of movement, when the rocker arm drive plate rises, the material and the plate without relative motion, and the water medium relative to the material is moving downward; when the rocker arm drive plate down, because the effect of gravity and particle medium resistance, produced by the downward acceleration acceleration is less than the plate. Water medium rise relative to the moving sieve plate flow, material can be suspended. When the particle falling velocity is less than the falling velocity of the moving sieve plate, the material interferes with the settlement in the water, and the bed has enough looseness and loose time to realize the effective delamination of the material according to the density. At the same time, due to the movement of the plate, also produced the material to move forward slope, light and heavy products can be layered respectively by the overflow weir plate on double lifting wheel, rely on the double lifting wheel off moisture, and coal gangue and its separated into the discharge chute in. Screening fine material discharged from the bottom of the tank mouth discharge fine material, and by removing buckettype lifting machine which will be screening material for. Code for safety operation of dust removal equipment I. preparation of wet dedusting system 1. before driving; (1) ventilator and motor should be checked for belt driven ventilators. The stability of fixed pulley and belt tensioning degree should be good; (2) check around the screw fan and the motor are lost and other objects to check, the PE or the leakage protector is in good condition; (3) check whether the water supply pipeline with water supply in good condition; (4) check the sewage an