船舶设计-结构专业英语.docVIP

船舶设计-结构专业英语 横剖图transverse section 中横剖图midship section 最大横剖图maximum section 中纵剖图longitudinal section in centre plan 甲板线deck line 甲板边线deck side line 甲板中线deck centre line 舷弧sheer 梁拱camber 梁拱线camber curve 舭部bilge 舭部升高deadrise 舭部半径bilge radius 龙骨线keelline 龙骨设计斜度rake of keel 龙骨折角线knuckle line of keel 龙骨水平半宽half-siding 折角线knuckle line 隧道顶线tunnel top line 首踵forefoot 尾踵aftfoot 轴包套shaft bossing 尾轴架propeller shaft bracket 尾鳍deadwood skeg 双尾鳍twin-skeg 球鼻首bulbous bow 椭圆尾elliptical bow 方尾transom stern 巡洋舰尾cruiser stern 隧道尾tunnel 球形尾bulbous 船体 hull 主船体main hull 船体结构hull structure 甲板板架deck grillage 舷侧板架side grillage 船底板架bottom grillage 舱壁板架bulkhead grillage 骨架framing 横骨架式transverse 纵骨架式longitudinal 混合骨架式combined 桁材girder 腹板web 面板face plate 构件member 列板strake 主要构件primary member 次要构件secondry member 连续构件continuous member 间段构件intercostal member 伸缩接头expansion joint 冰区加强ice strengthening 纵骨longitudinal 纵桁longitudinal girder stringer 肘板bracket 防倾肘板tripping bracket 折边肘板flanged bracket 贯通肘板through bracket 水平肘板horizontal bracket 加强筋stiffer rib 覆板doubling plate 扣板gusset plate 压筋板swaged plate 人孔man hole 扇形孔scallop 流水孔drain hole 流水沟gutterway 透气孔air hole 通焊孔clearance hole 减轻孔lightening hole 洗舱孔tank cleaning opening 肘板连接bracket connection 直接连接lug connection 面板切斜连接clip connection 切斜端snip end 跨距span 纵骨间距spacing of longitudinals 肋距frame spacing 外板shell plate 方龙骨bar keel 平板龙骨plate keel 船底板bottom plating 舭列板bilge strake 舭龙骨bilge keel 舷侧外板side plating 舷顶列板sheer strake 舷墙bulwark 单底single bottom 双层底double bottom 内地板 inner bottom plating 内地边板margin plate 龙骨keel 中内龙骨center keelson 旁内龙骨side keelson 中桁材center girder 旁桁材side girder 箱形中桁材duct center girder 半高底桁材half depth girder 船底纵骨bottom longitudinal 内底纵骨inner bottom longitudinal 肋板floor 实肋板solid floor 水密肋板water tight floor 油密肋板oil tight floor 组合肋板bracket floor 轻型肋板lightened floor 尾肋板transom floor 船底横骨bottom frame 内底横骨reverse frame 撑材strut 舭肘板bilge bracket 污水井bilge well 坞龙骨docking keel 船侧骨架side framing 肋骨frame 主肋骨main frame 强肋骨web frame 深舱肋