漂亮的迷你驱动和TarDisk迷你驱动器拆解-iFixit.PDF

Nifty MiniDrive and TarDisk MiniDrive Teardown Nifty MiniDrive and TarDisk MiniDrive Teardown Opening up to see inside of a Nifty MiniDrive and a new TarDisk MiniDrive to see how they are assembled get a good look at the interior adapter chip and overall build. Written By John © iFixit — CC BY-NC-SA www.iFixit .com Page 1 of 7 Nifty MiniDrive and TarDisk MiniDrive Teardown INTRODUCTION Ive had 3 Nifty MiniDrives in all, backed their kickstarter and received updated models. None of them where very reliable, and would not work or work for a brief time and stop and I would loose data or backups. In my search for a similar product I used a drive by TheMiniD for a while but hated the removal method. Recently I came across a contacted company called TarDisk a new MiniDrive maker and emailed them about these problems I have had with such devices, they sent me two free drives one to use and one to teardown. So here is a side by side teardown of both Nifty MiniDrive and TarDisk (MiniDrive). TOOLS: Xacto Knife, or Razor Blade (1) © iFixit — CC BY-NC-SA www.iFixit .com Page 2 of 7 Nifty MiniDrive and TarDisk MiniDrive Teardown Step 1 — Opening p Nifty MiniDrive  We are taking apart the new Nifty MiniDrive. First find the sonic weld where the front and back plastic pieces are fused together this is the easiest point to open, you will need a razor blade or an Xacto knife. Start at the MicroSD port cut down the weld to the to metal end cap.  Then up from the MicroSD port and around the top. Try to say on the sonic we