建筑快题绘图技法 快题绘图总结（Rapid construction; drawing techniques; quick drawing; summary）.docVIP

建筑快题绘图技法 快题绘图总结（Rapid construction; drawing techniques; quick drawing; summary） Construction fast drawing techniques, quick questions, drawings, summary 2.10: wall line representation Wall lines are generally divided into load-bearing walls and non load walls, or glass walls! The load-bearing walls and columns are black (black 120), and the non load walls are grey (gray, grey, CG5). The wall line does not have to be painted in two lines. You can draw it with a single line and then draw it directly with a Mark pen. Leave the window and the door behind! 2.11: part of the window L at 1:50, the part of the window has four lines When the ratio of L to 1:100, the part of the window has three lines When the ratio of L to 1:200, the part of the window has two lines 2.12: door representation (door with 45 degrees angle, double line segment) There are many kinds of door expressions. The most important thing to remember is that the hall and the door are enough. A little attention is given to the bathroom and the balcony with an open-air balcony! The door of the hall is revolving, and a single fire door is needed on both sides of the door! 2.13: the upper layer of suspended space dotted line representation When the superstructure of the upper space is cantilevered, the outline of the projection shall be shown on the floor plan by dotted lines! To express the relation between the upper and lower spaces! 2.14: two floor plan see a layer of roof space, the roof should be paved at the same time, the inner division This space is gray space, not in the construction area, but it can have a good architectural landscape effect! In the design can be used more, but in the performance should be clear, and indoor space to be separated from, you can use words to express, such as Roof garden, open-air garden and so on 2.15: two layers of flat and flat traction lines When the two planes occupy only a small part of the plane, and do not see how the specific docking, it is necessary to use tract