京瓷1087所有代码（KYOCERA 1087 all the code）.docVIP

京瓷1087所有代码（KYOCERA 1087 all the code） KYOCERA 1087 collection Dong Zhihui @ 2006-08-29 10:14:41 Analog function access: bootcode copy key operation stop / clear 01 COPY key exit Simulation function Component code function, default value, part code function, default value U01 cancel analog operation, U54 adjuster, whole side blank edge The whole machine U02 not feeding, copying, U82 setting, optical components, fan control U03 copies the standard rate by U83, setting the temperature correction value of halogen exposure light U04 copies in different exposure proofs U97 the focal length of the lens set Paper and paper feed, U10 start, drive motor, drum charging and cleaning parts, U30 switch on main charging U11 check with paper transfer switch U31 to transfer the charge Exposure level switch U32 detects drum surface potential 5 carton lifting switch U40, adding powder to clean scraper, replacing scraper 4.5 mirror original position U42 light exposure light 4 Lens original position, U77 initialization drum drive time count, replace drum 3.5 the original position of the scanner is fixed, U46 is adjusted and the fusing temperature is adjusted 3 panel operation, U50 panel light is all bright 2.5 row of paper development, U60 initialize toner control voltage, replace carrier The U12 2 is forced to supply powder to the U61 Check clutch U62 related to paper and set control potential of each inspection toner Digital key paper clutch U80 detected AP powder voltage, select copy operation 1 initialize the U70 memory by initializing the bit memory 2 carton paper counting device, U71 setting maintenance counter preset value 3 manual paper exposure level description U15 adjusts the 1 maintenance counters of the copy paper at the counter roller, predetermined values 100 thousand and 10 thousand, 03 Exposure level instructions 1.5. Maintenance counters preset values 1000 and 10000 1 cartons 702 maintenance counters preset values 10 and 100 1.5 manual feeding 70 U72 setting