玻璃制品模具的制造（Manufacture of glass mould）.docVIP

玻璃制品模具的制造（Manufacture of glass mould） Glass mold manufacturing mold / Forum Your position: mold mold design mold forum - - comprehensive data. The latest opening of the mold net high-definition beauty Gallery, work out for your eye!! - - reprint tools! A | a | refresh | search | membership Center * post theme: glass mold manufacturing, reading 61 people Girls: Yang Fan Fortune: 2232 yuan Registration: 2007-12-22 Communication: Blog | information | | | report | delete reference editor | transfer | top | take the top | sperm | lock | finishing landlord Just watch the landlord Post By:2008-1-26 10:47:32 Abstract: first, the conditions of the manufacture of mold 1, environmental conditions. Temperature: should always keep the same environmental temperature in the manufacturing process of male and female mold, which is 21 to 28 DEG C. Humidity: relative humidity on the gel coat resin curing and great influence, the ideal humidity range from 40 to 60, if the relative humidity is more than 65 mold manufacturing, should wait to the appropriate conditions of production and construction, especially in the South and coastal areas, the humidity is relatively large, should be careful. In a dirty environment, a high quality mold cannot be made. I. conditions for manufacturing moulds 1, environmental conditions. Temperature: should always keep the same environmental temperature in the manufacturing process of male and female mold, which is 21 to 28 DEG C. Humidity: relative humidity on the gel coat resin curing and great influence, the ideal humidity range from 40 to 60, if the relative humidity is more than 65 mold manufacturing, should wait to the appropriate conditions of production and construction, especially in the South and coastal areas, the humidity is relatively large, should be careful. 2 clean workshop. In a dirty environment can not produce high quality molds, mold manufacturing, Yin area should be highly clean, must be larger than the production area products have