性能参数表 - 长沙福斯水泵泵业有限公司.docVIP

IS、IR、IY型单吸单级离心泵 安装使用说明书 长沙福斯水泵泵业有限公司 Fuchs Changsha Pump pump industry limited company 概 述 General IS型泵是单级单吸（轴向吸入）离心泵，供输送温度低于80℃的清水或物理、化学性质类似于水的其他液体，泵的进口压力小于0.3MPa，适用于工业和城市给排水及农业排灌。 IR型热水离心泵是在IS型单级离心泵的基础上派生的节能产品，该系列产品设计合理，安装维修方便，适用于输送温度低于130℃的清水或物理、化学性质类似于水的介质。泵的吸入口压力不大于0.6Mpa，可用于热水锅炉及与换热器配套，作为循环水泵，给水泵，也可作其他用途的输水泵，如城市给排水和矿山排水等。 IY型单级单吸输油离心泵，适用于输送不含固体颗粒，粘度小于120厘沲的无腐蚀类和石油产品。也供输送清水或物理及化学性质类似于清水的其他液体，温度不高于80℃，进口压力不大于0.3MPa。 Type IS pump is single stage single suction(axial suction) centrifugal pump, deliver clean water or other liquid which chemical physical feature is similar with clean water, the temperature is less than 80℃.Inlet pressure is less than 0.3MPa, it is suitable for delivering water in industry, city and farm irrigation. Type IR pump is heat centrifugal pump, the serial pump design reasonable, installing repairing conveniently, it suitable for delivery clean water or which chemical physical feature is similar with clean water. Inlet pressure is less than 0.3MPa, the temperature is not more than 130℃.it can equipped with boiler and heat-changer, as circulating water pump or feed pump, also used to supply water, for example, supply water in city and mine etc. Type IY pump is single stage single suction centrifugal oil pump, suitable for delivery no corrosive liquids and petroleum products, which is not contain solids and the Viscosity is less than 120Cst. Also used to deliver clean water or other liquid which chemical physical feature is similar with clean water, the temperature is less than 80℃.Inlet pressure is less than 0.3MPa 性 能 范 围（设 计 点） Performance Range(design point) 流量 Capacity：6.3~400m3/h 扬程 Head：5~125m 型 号 意 义 Type Description IS（IR、IY）80-65-125A IS—单级单吸清水离心泵 IS—Single-stage single-suction clean water centrifugal pump IR—单级单吸热水离心泵 IR—Single-stage single-suction heat wate centrifugal pump IY—单级单吸输油离心泵 IY—Single-stage single-suction centrifugal oil pump 80—泵入口直径为80mm 80—Inl