NETGEAR无线路由器说明书（国外英文资料）.docVIP

NETGEAR无线路由器说明书（国外英文资料） The WGR614v10 quick installation guide Thank you for choosing NETGEARs 11g series router, WGR614v10, which will show you how to install the router. A total of There are two parts: basic Internet setting and wireless security Settings. Part 1 basic online Settings WGR614v10 Lights and ports LAN1/2/3/4 - LAN (normal connection to 100Mbps device) to When it comes to 10Mbps, its orange ) Internet - WAN port indicator (a normal connection and no access to IP is orange; normal connection and retrieval to When IP is, its green; There is a flash in the data transfer ) Wireless - the Wireless indicator (when Wireless is enabled, it is blue and the frequency is flashing ) WPS - WPS mode indicator (the router enters WPS search mode, the indicator flicker, the other time is long , Green; If the wireless is not encrypted, it is extinguished ) Power - the Power supply indicator (an orange when energized, is in a state of self-check; a stable operation is green ) Reset Button - Reset key (the key is 15 seconds under the power supply, which enables the router to recover to the factory setting ) WAN Port - WAN Port (used to connect ADSL/Cable Modem or Ethernet Cable ) LAN Port - LAN Port (4 10/100m ADAPTS to Ethernet ports for connection to 4 cable devices ) Power Button - Power switch (used to turn on the Power supply for the router ) Power - Power supply interface (for connecting the Power supply to the router ) WPS Push Button - WPS Button (with wireless client support for WPS) make Use, can implement a key to encrypt ) Wireless ON/OFF - Wireless switch (for turning ON or OFF the routers Wireless capability) ) Will WGR614v10 Proper access network 1. If your broadband connection is ADSL/Cable Modem, the connection is shown below: 2. If your broadband is direct, there is no Modem, and the computer connects to the routers LAN port, which the original operator provides Line or broadband interface directly connected to the routers WAN port. Note: after completi